Cabinet Doors in Meridian, Idaho
New doors on boxes that are still square. Overlay or inset. Not a full box replace.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
This job covers
- New doors on sound existing boxes
- Convert overlay fronts to shaker
- Glass inserts in upper doors
- Soft-close hinge retrofit only
Cabinet Doors in Meridian, Idaho
Meridian Quality Cabinets provides cabinet doors in Meridian on boxes that are still square, replacing oak cathedral slabs without a full box swap. The oak cathedral doors are the part you hate. We hang new fronts and leave the cases.
Hit (208) 759-1616 with a door count and overlay or inset. We measure each opening.
Cabinet Doors Options for Meridian Properties
New doors on sound existing boxes
Five-piece shaker, a slab, or a raised panel. We bore 35mm cups for concealed hinges, or we keep a face-mount if the frame is old. Drawer fronts are a separate cut list. This is the job when plywood cases are fine and the look is not.
Convert overlay fronts to shaker
Builder overlay slabs in Tuscany and Century Farm are often thermofoil. We replace them with painted maple shaker in the same overlay. Hinge boring changes. You keep the boxes, the counter, and the layout. The kitchen reads new from the living room.
Glass inserts in upper doors
A mullion door or a single pane in the uppers. Glass is tempered. We do not set stained glass. Light rail and interior LED are a different add. This is one wall, not the whole kitchen, unless you say so.
Soft-close hinge retrofit only
If the doors stay, we swap the hinges or add a damper. Six-way European hinges replace tired face-mounts when the door still sits. This is a hardware ticket. It is on this page because people search doors when they mean the slam.
How We Handle Cabinet Doors in Meridian
- Measure every opening. Note hinge type and overlay.
- Check the boxes for swell, rack, and a loose back. Door-only stops if the case is failing.
- You pick profile, species, and paint or stain. We cut a sample door if the finish is picky.
- Hang doors, set drawer fronts, and adjust reveals.
- Install pulls if you supply them, or we bore to a jig you approve.
- You open every door. We tweak the hinges before we leave.
Materials and Methods
Doors are rail-and-stile, 3/4 inch, with a 2.25 or 2.5 inch rail on shaker. Panels are flat MDF for paint, or solid wood for stain. Slabs are MDF or veneered plywood. We do not hang paper-thin thermofoil as a premium door.
Doors are 3/4-inch five-piece or slab. Hinge boring follows the overlay. Soft-close concealed hinges. ANSI/KCMA A161.1 talks to the box, not to a single door. Conversion varnish or a catalyzed paint on wood. We do not call a vinyl-wrapped MDF slab a wood door. Overlay versus inset is a reveal. A 1/2-inch overlay on a racked box will rub. We plane after the box is set.
Hinges are concealed 110 degree with soft-close, or a wraparound for old face frames. Boring is 35mm, 3mm from the edge, or whatever the hinge chart says. Drawer fronts get a 1/2 inch overlay unless you are inset.
Finish matches an existing run if we can. A new color means the boxes may still show at the reveal. Paint the cases, or live with the old stain in the gap. We say that before you order.
What Cabinet Doors Cost in Meridian
HomeAdvisor publishes cabinet refacing at $4,234 to $10,226 when new doors and veneer are a package. Fixr lists refacing at $3,000 to $13,500. Door-only is usually less than a full reface because we are not skinning the boxes. Size, species, and paint versus stain move per-door cost.
Count, hinge change, and finish are the three levers. A 10-door galley is not a 40-front kitchen. We bid the openings. (208) 759-1616 is the line.
Door-only refresh on Meridian builder boxes
Door-only work fails when the sink base is swollen or the face frame is loose. We say that before you order twenty shaker fronts. Many 1990s and 2000s Meridian kitchens still have square plywood or decent particleboard cases with tired honey-oak doors. New five-piece doors and new hinges change the room without a three-week gut. That is the classic west-Boise-to-Meridian buyer refresh.
Hinge boring is a chart, not a guess: 35mm cups, overlay or inset, edge distance from the hinge maker. Drawer fronts get a jig so the gaps match. Paint on new doors against old stained cases will show at the reveal. Budget to paint the boxes, or live with the line. Pulls are your supply or ours, bored after you approve the spacing.
Eagle and Hidden Springs kitchens that want inset doors on out-of-square builder boxes are a fight. We tell you when overlay is the honest door-only path. Thermofoil that is peeling near a range is a door replace, not a wipe. Raised-panel oak you hate can become shaker without touching a counter. HOA packets almost never care about interior door style. LED kitchen light still lies about white, so we hang a sample door in the room when the color is picky.
Count every door and every drawer front. A 10-front galley is not a 40-front kitchen. Laundry and mudroom doors can match the kitchen lot if you order them on the same ticket. Production plats south of I-84 are usually overlay. Do not assume inset because a magazine kitchen in Eagle used it.
Text (208) 759-1616 the door count, overlay or inset, and a photo of a typical front. Soft floors at the sink end the door-only talk.
Questions
How do I get a cabinet doors estimate in Meridian?
Count the doors and drawer fronts. Note overlay or inset. A photo of a typical door and the hinge type helps. We measure each opening. Boxes that are racked need a different page. Name the town and the job when you call.
Can I keep my boxes and change the doors?
If the cases are plywood, square, and dry, yes. We bore for new hinges and hang new five-piece doors. Particleboard boxes that are swollen at the sink are not door-only work. We tell you that on the visit.
Do new doors include new hinges?
Usually. Overlay changes, or a move from face-mount to concealed, need new hinges and new bores. Soft-close inserts on existing European hinges are a cheaper path when the doors stay. We spec that on the ticket. Name the town and the job when you call.
What do cabinet doors cost?
HomeAdvisor's refacing band is $4,234 to $10,226 when doors and veneer are a package. Fixr lists refacing at $3,000 to $13,500. Door-only work is a subset of that. Per-door price follows size, species, and whether we paint.
Can new kitchen doors match a laundry or mudroom in Meridian?
Yes, if we order one lot. Dye lots shift between batches. Say the laundry and mudroom fronts on the same measure as the kitchen so the shop runs one color. Hinges and boring still follow each opening. Name the town and the job when you call.
When is door-only the wrong hire on a Meridian kitchen?
When the sink base floor is wavy, the face frame is loose, or you want a new layout. Swollen particleboard in 2000s production kitchens is common. We open the sink base on the visit. Soft boxes need replacement, not pretty doors on dust.
Ready for a cabinet estimate in Meridian?
Kitchens, vanities, built-ins. Free estimate, no obligation.