Cabinet Doors in Meridian, Idaho

Meridian Quality Cabinets provides cabinet doors in Meridian, Idaho. The boxes are still square. The oak cathedral doors are the part you hate. We hang new fronts and leave the cases.

Hit (208) 759-1616 with a door count and overlay or inset. We measure each opening.

Cabinet Doors Options for Meridian Properties

New doors on sound existing boxes

Five-piece shaker, a slab, or a raised panel. We bore 35mm cups for concealed hinges, or we keep a face-mount if the frame is old. Drawer fronts are a separate cut list. This is the job when plywood cases are fine and the look is not.

Convert overlay fronts to shaker

Builder overlay slabs in Tuscany and Century Farm are often thermofoil. We replace them with painted maple shaker in the same overlay. Hinge boring changes. You keep the boxes, the counter, and the layout. The kitchen reads new from the living room.

Glass inserts in upper doors

A mullion door or a single pane in the uppers. Glass is tempered. We do not set stained glass. Light rail and interior LED are a different add. This is one wall, not the whole kitchen, unless you say so.

Soft-close hinge retrofit only

If the doors stay, we swap the hinges or add a damper. Six-way European hinges replace tired face-mounts when the door still sits. This is a hardware ticket. It is on this page because people search doors when they mean the slam.

How We Handle Cabinet Doors in Meridian

1. Measure every opening. Note hinge type and overlay.
2. Check the boxes for swell, rack, and a loose back. Door-only stops if the case is failing.
3. You pick profile, species, and paint or stain. We cut a sample door if the finish is picky.
4. Hang doors, set drawer fronts, and adjust reveals.
5. Install pulls if you supply them, or we bore to a jig you approve.
6. You open every door. We tweak the hinges before we leave.

Materials and Methods

Doors are rail-and-stile, 3/4 inch, with a 2.25 or 2.5 inch rail on shaker. Panels are flat MDF for paint, or solid wood for stain. Slabs are MDF or veneered plywood. We do not hang paper-thin thermofoil as a premium door.

Hinges are concealed 110 degree with soft-close, or a wraparound for old face frames. Boring is 35mm, 3mm from the edge, or whatever the hinge chart says. Drawer fronts get a 1/2 inch overlay unless you are inset.

Finish matches an existing run if we can. A new color means the boxes may still show at the reveal. Paint the cases, or live with the old stain in the gap. We say that before you order.

What Cabinet Doors Cost in Meridian

HomeAdvisor publishes cabinet refacing at $4,234 to $10,226 when new doors and veneer are a package. Fixr lists refacing at $3,000 to $13,500. Door-only is usually less than a full reface because we are not skinning the boxes. Size, species, and paint versus stain move per-door cost.

Count, hinge change, and finish are the three levers. A 10-door galley is not a 40-front kitchen. We bid the openings. (208) 759-1616 is the line.

Door-only work fails when the sink base is swollen or the face frame is loose. We say that before you order twenty shaker fronts. Hinge boring is a chart, not a guess: 35mm cups, overlay or inset, 3mm or whatever the hinge maker prints. Drawer fronts get a jig so the gaps match. Paint on new doors against old stained cases will show at the reveal. Budget to paint the boxes, or live with the line. Pulls are your supply or ours, bored after you approve the spacing.

Count every door and every drawer front. A 10-front galley is not a 40-front kitchen. Sample doors matter when the paint is a custom mix. We hang a sample on an existing box if the color is picky. Thermofoil that is peeling is a door replace, not a wipe. Raised-panel oak that you hate can become shaker without touching a counter. If the face frame is loose, we stop and talk about boxes.

Cabinet Doors Questions

How do I get a cabinet doors estimate in Meridian?

Count the doors and drawer fronts. Note overlay or inset. A photo of a typical door and the hinge type helps. We measure each opening. Boxes that are racked need a different page.

Can I keep my boxes and change the doors?

If the cases are plywood, square, and dry, yes. We bore for new hinges and hang new five-piece doors. Particleboard boxes that are swollen at the sink are not door-only work. We tell you that on the visit.

Do new doors include new hinges?

Usually. Overlay changes, or a move from face-mount to concealed, need new hinges and new bores. Soft-close inserts on existing European hinges are a cheaper path when the doors stay. We spec that on the ticket.

What do cabinet doors cost?

HomeAdvisor's refacing band is $4,234 to $10,226 when doors and veneer are a package. Fixr lists refacing at $3,000 to $13,500. Door-only work is a subset of that. Per-door price follows size, species, and whether we paint.