Meridian Quality CabinetsMeridian, ID

Laundry Cabinets in Meridian, Idaho

Small rooms, washer hookups, and a folding surface that is actually level.

Free estimate. Call or text the same number.

Meridian Quality Cabinets provides laundry cabinets in Meridian, Idaho. The room is 6 feet wide, the vent is in the wrong stud bay, and the folding pile lives on the dryer. We build around the machines.

Dial (208) 759-1616 with stacked or side-by-side. We measure the hookups before we cut.

Laundry Cabinets Options for Meridian Properties

Stack washer surround

A stacked pair needs a 27 to 28 inch wide opening and a finished box around it. We leave airflow and a path for the vent. Uppers over the stack hold detergent. A side broom closet takes the leftover 12 inches. Do not bury the shutoffs.

Folding counter over front-load units

Side-by-side front-loads get a 25 inch deep counter at about 36 inches if you skip a pedestal, or higher if the machines sit on drawers. We build a box that does not rack when someone leans on it. The machines slide out for service. That means a finished look with a removable panel.

Tall broom closet in a mudroom

Many Meridian laundry rooms share a mudroom. A 18 inch tower holds a vacuum, a broom, and hooks. A bench with shoe cubbies is a different box next to it. Same door style as the kitchen if you want the house to match.

Open slat rack over a utility sink

A slatted maple rack over a 24 inch utility sink lets drips fall. The box below is a door, not a drawer, so the trap has room. This is a farm-house leftover in Kuna and Melba more than a south Meridian plat. We still build it when you ask.

How We Handle Laundry Cabinets in Meridian

  1. Measure the room, the machines, the vent, and the shutoff box.
  2. Decide stack versus side-by-side, and whether a counter sits over the pair.
  3. Draw the run so doors clear the machines when they are pulled out 6 inches.
  4. Build moisture-resistant cases. Leave access panels at the valves.
  5. Set, level, and lag. The machines go back in after the boxes are solid.
  6. You test a door swing with a basket in your hand before we leave.

Materials and Methods

Laundry is damp. Plywood cases, a catalyzed finish, and a 1/4 inch back that can take a vent cut. We do not use raw MDF next to a washer pan. Toe-kicks scribe to a sloped floor toward a drain if the room has one.

Hardware is the same soft-close set as the kitchen if you want a match. Cheaper hinges are fine on a broom closet. A folding counter gets a 3/4 inch plywood substrate and an easy-clean laminate or a hardwood edge. Stone is rare in this room and is a different bid.

Clearance: 1 inch behind a dryer for the vent elbow if the box is tight. We cut that void. The appliance installer sets the machines. We do not.

What Laundry Cabinets Cost in Meridian

Angi's project table lists laundry and mudroom work at $2,000 to $7,500 for 5 to 15 linear feet. HomeGuide's 2026 cabinet guide puts laundry room cabinets at $300 to $2,000 installed as a typical national band. A surround plus a folding counter sits toward the high end.

Room width, stack versus side-by-side, and a utility sink box are the three levers. We quote the wall, not a catalog. (208) 759-1616 is the number.

Laundry rooms punish MDF. We keep plywood at the washer pan and an access panel at the valves. Stack surrounds need airflow and a vent elbow void. Side-by-side front-loads need a counter that does not rack when someone folds on it. Machine model numbers matter. A top-load lid needs height a front-load does not. We do not slide the washer. The appliance installer does, after the boxes are lagged.

A mudroom that shares the laundry wants a bench and a broom tower more than a folding counter. A 6-foot closet wants the reverse. Vent elbows need an inch. Shutoff boxes need a door, not a sealed panel. We leave both. Laminate on a folding counter is easier to wipe than stone and cheaper to replace if a hose leaks. Stone is still a different bid if you insist.

Laundry Cabinets Questions

How do I get a laundry cabinets estimate in Meridian?

Tell us if the units are stacked or side by side, and the width of the room. A photo of the hookups and the dryer vent helps. We measure around the machines. We do not move the washer.

Can cabinets sit over a front-load washer?

Yes, if we leave height for the lid of a top-load, or a counter over a front-load. Front-load pairs take a 27 to 28 inch counter height if you want a folding surface. Confirm the machine model before we cut.

Do laundry cabinets include a sink?

We can build a box for a utility sink. The plumber sets the bowl and the trap. A slat drying rack over that sink is a shop add-on. Water lines stay where they are unless you hire a plumber.

What do laundry cabinets cost?

Angi lists laundry and mudroom cabinets at $2,000 to $7,500 for 5 to 15 linear feet. HomeGuide publishes $300 to $2,000 for laundry room cabinets as a typical installed band. Tight rooms and a folding counter move the quote. We bid the wall we measure.

Free cabinet estimate

Say kitchen, bath, or built-ins, and whether the layout stays. A local shop quotes after measuring.

Ready for a cabinet estimate in Meridian?

Kitchens, vanities, built-ins. Free estimate, no obligation.

Call (208) 759-1616 Text (208) 759-1616