Shaker Cabinets in Meridian, Idaho

Meridian Quality Cabinets provides shaker cabinets in Meridian, Idaho. Shaker is a five-piece door with a flat panel and square sticking. The box behind it still has to be plywood and square.

Start at (208) 759-1616 with paint or stain and the room. We spec the door and the case together.

Shaker Cabinets Options for Meridian Properties

Painted maple shaker with 2.25 inch rails

The common Meridian look. Maple rails and stiles, MDF or maple panel, conversion-varnish paint. A 2.25 inch rail is the usual. Wider rails read heavier. This is what people mean when they search shaker in a 2010 plat.

Stained white oak shaker

White oak with a clear or a light stain, 2.5 inch rails, and a solid or veneered panel. Grain shows. It does not hide dings the way paint does. Eagle kitchens ask for this more than south Meridian production. Sample the stain on the actual species.

Five-piece MDF shaker for paint

All-MDF doors are stable for a painted run in a dry climate. Treasure Valley humidity is low. MDF still fails next to a leaking dishwasher. We keep MDF off the sink base sides. The door can be MDF. The wet box stays plywood.

Recessed panel with square sticking

That is the shaker profile: a flat panel set back from square rails, no ogee, no bead unless you ask. A beaded shaker is a different cut. Raised panel is not shaker. We will not label a cathedral oak door as shaker on a ticket.

How We Handle Shaker Cabinets in Meridian

1. Confirm the door is five-piece shaker, overlay or inset, paint or stain.
2. Measure the run the same way we measure any kitchen or bath.
3. Cut a sample door for paint color or stain on the real species.
4. Build boxes and doors as one ticket so reveals match.
5. Hang, set even gaps, and install hardware on a jig.
6. You check a bank of doors in raking light. We adjust.

Materials and Methods

Shaker doors are rail-and-stile, cope-and-stick or mitered, 3/4 inch thick. Panel is 1/4 inch or a raised-flat in a groove that allows movement on wood. Paint-grade uses a glued panel. Hinge boring follows the overlay chart.

Boxes stay 3/4 inch plywood. Shaker does not make a particleboard case better. Soft-close hinges, full-extension slides, and a scribed toe-kick are the same as the custom page. Crown can be a simple square cap, not a Victorian profile, if you want the look to stay honest.

Finish: catalyzed conversion varnish on paint, or stain plus conversion on oak and maple. We do not call a vinyl-wrapped slab a shaker door. If that is the budget path, we say vinyl.

What Shaker Cabinets Cost in Meridian

Shaker is the door, not a separate cost table. Fixr's kitchen install band is $4,000 to $14,000, average $7,000. Custom sits at $500 to $1,200 per linear foot. HomeAdvisor's custom average is $7,420, range $2,799 to $12,928. Angi install average is about $6,188.

Paint versus stain, overlay versus inset, and linear feet move the bid. A painted overlay run in a 12x12 kitchen is not an inset white-oak Eagle kitchen. We quote the ticket. Use (208) 759-1616 .

Shaker is a five-piece door with square sticking. It is not a vinyl slab with a routed groove. Paint-grade maple rails with an MDF panel are the Meridian default. Stained white oak is the Eagle ask. Inset is slower. Overlay is what most 2010 plats want. The box behind the door is still 3/4 inch plywood. A pretty door on a swollen particleboard sink base is a callback. We spec both on one ticket.

Beaded shaker is a different cutter. Raised panel is not shaker. A routed vinyl slab is not shaker. We put the real profile on the ticket so the shop does not guess. A catalyzed paint film holds a hot August better than a waterborne latex beside a dishwasher. Sample the stain on white oak, not on a printed chip. Overlay versus inset is the other fork. Most plats want overlay. Inset is the slower Eagle ask.

Shaker Cabinets Questions

How do I get a shaker cabinets estimate in Meridian?

Say kitchen, bath, or a whole-house match. Note paint or stain. A photo of the current doors helps. We measure the run like any other cabinet job. Shaker is the door, not a shortcut on the box.

Painted maple or MDF for shaker?

Paint-grade maple holds a profile. MDF panels stay flat on a five-piece door. We often use maple rails and an MDF panel for paint. Stain wants a wood panel. Thermofoil shaker is a different product. We name it if that is what you want.

Can shaker be inset?

Yes. Inset shaker is a face-frame job with even gaps. Overlay shaker is faster and cheaper. Most south Meridian replaces are overlay. Eagle and Hidden Springs more often ask for inset. Both are shaker.

What do shaker cabinets cost?

Shaker is a door style on stock, semi-custom, or custom boxes. Use the same national bands: Fixr $4,000 to $14,000 for a kitchen install, custom $500 to $1,200 per linear foot. HomeAdvisor custom average $7,420. The profile itself is not a separate price list.